Ha részletfizetéssel vásárolná meg a terméket, helyezze a kosárba, majd
a fizetési módnál jelölje be Cetelem Online Áruhitelt.
Leírás
Bar with 2 derbies, 2 spots, white strobe LEDs and laser inklusive speaker stand
EUROLITE LED KLS Laser Bar FX Light Set
Bar with 2 derbies, 2 spots, white strobe LEDs, laser (RG, 2M), foot switch
- Crossbar with integrated DMX control unit and stand sleeve
- 2 laser diodes project hundreds of red and green laser beams
- 2 rotating derbies for mirror ball effects
- For application areas such as: Wedding/gala/events; mobile use; Party room; mobile djs / entertainer; small rental
- When fog is used, this effect becomes especially attractive
- 37 integrated show programs
- The device is cooled by cooling fan
- Control via stand-alone; DMX; IR remote control; sound to light via microphone; wireless footswitch; master/slave function
- With Mounting bracket
- Preprogrammed in Light´J; LED PC-Control 512; Light Captain; EASY SHOW 1; EASY SHOW 2; EASY SHOW 3
- Mains input and output for power linking up to 8 units
- Laser; multi beam effect; strobe effect; flower effect
- Application possibility: On stand
laser
- Laser class 2M
does not require additional protective measures or appointment of a laser safety officer
spotlight
- 3 powerful LEDs 3 W high-power 3in1 TCL RGB (homogenous color mix)
2 spots controlled separately - With a beam angle of 13°
light effect
- 3 powerful LEDs 1 W high-power R/G/B
2 spots controlled separately
bar
- 4 powerful LEDs 1 W high-power cold white (CW)
LEDs controlled separately
Package contents
- 1 x user manual, 1 x declaration of conformity, 1 x power cord, 1 x foot control, 1 x remote control, 2 x battery, 2 x mounting bracket, 2 x knurled screw, 1 x bag, 2 x washer
OMNITRONIC M-3 Speaker-System Stand
Speaker stand, extendible up to 180 cm, maximum load 30 kg
- Stable speaker stand for mobile use
- Adjustable height
Package contents
- 1 x stand, 1 x user manual
Paraméterek
Weight | 12,25 kg | |
EUROLITE LED KLS Laser Bar FX Light Set | ||
Power supply | 100-240 V AC, 50/60 Hz | |
Power consumption | 50 W | |
IP classification | IP20 | |
Protection class | Protection class I | |
Power connection | Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) | |
Power output | 1 x IEC connector (F) mounting version | |
Device fuse | 5 x 20 mm, F 1 A fuse replaceable | |
Lamp type | LED lamp | |
Flash rate | 0 - 30 Hz | |
DMX channels | 3; 5; 9; 27 | |
DMX input | 1 x 3-pin XLR (M) mounting version | |
DMX output | 1 x 3-pin XLR (F) mounting version | |
Cooling | Cooling fan | |
Control | Stand-alone; DMX; IR remote control; sound to light via microphone; wireless footswitch; master/slave function | |
Preprogrammed in | Light´J; LED PC-Control 512; Light Captain; EASY SHOW 1; EASY SHOW 2; EASY SHOW 3 | |
Housing color | Black | |
Attachment system | 2x Mounting bracket | |
Dimensions | Width:1,09 m | |
Depth | 14,5 cm | |
Height | 37 cm | |
Weight | 9,05 kg | |
Noise classification | Class 2 (slight noise) | |
Light effect | ||
LED type | 3 x 1 W high-power R/G/B | |
Spotlight | ||
LED type | 3 x 3 W high-power 3in1 TCL RGB (homogenous color mix) | |
Beam angle | 13° | |
Beam angle (1/2 peak) | 13° | |
Beam angle (1/10 peak) | 20° | |
Foot control | ||
Battery | 1 x 9.0 V E block 6LR61 alkaline manganese included | |
Remote control | ||
Battery | 1 x Button cell 3.0 V CR2025 lithium manganese built-in | |
Laser | ||
Laser class | 2M | |
Laser color | R/G | |
Laser module | Red (R) 100 mW 650nm | |
Green (G) 30 mW 532nm | ||
Bar | ||
LED type | 4 x 1 W high-power cold white (CW) | |
Beam angle (1/2 peak) | 7° | |
OMNITRONIC M-3 Speaker-System Stand | ||
Maximum carrying capacity | 30 kg | |
Height | Maximum:182 cm | |
Minimum | 100 cm | |
Attachment system | Ø 35mm | |
Type (general stands) | Speaker stand/manual | |
Material | Steel (powder-coated) | |
Color | Black, painted | |
Weight | 3,20 kg |
Vélemények
Erről a termékről még nem érkezett vélemény.
Írja meg véleményét!