Ha részletfizetéssel vásárolná meg a terméket, helyezze a kosárba, majd
a fizetési módnál jelölje be Cetelem Online Áruhitelt.
Leírás
HMI / MSR / HMP / OMI lamps
Basics:GS=Gap Short (shortened electrode space)DE=Double Ended (double-sided lamp with threaded pin)SE=Single Ended (one-sided lamp)PAR=Lamp built in a parabolic reflector HMP=Due to their special filling and to their electrode system, HMP-lamps cannot only be "dimmed", but also be "boosted", i. e. be operated beyond their rated power. During this, the light technical characteristics, such as color temperature, color rendering index and light output are practically constant during "dimming" and "boosting".
- Extremely high light output
- Best color rendering
- Light output three to four times higher in comparison to filament light
- Light is generated via an arc between two electrodes
- Constant color temperature and color rendering behaviour over the whole lamp life
- Halogen metal evaporation lamps provide a spectrum composed of a lot of lines, in contrast to temperature radiators, as halogen-incandescent lamps
- For further information about this product, please refer to the Data Sheet under "Downloads"
Paraméterek
| Voltage (lamps) | 90 V |
| Nominal wattage | 250 W |
| Base | GY9.5 |
| Lamp type | Metal vapour lamp |
| Color temperature | 8500K |
| Burning position | S180 (universal) |
| Lamp life | 3000 h |
| Luminous flux | 18000 lm |
| Dimensions (LxD) | 108x23 mm |
| Weight | 40 g |
| Legal specifications | |
| Special product | Not designed for household room illumination |
| Intended use | Show effect lighting |
Vélemények
Erről a termékről még nem érkezett vélemény.
Írja meg véleményét!